Related Products
- Manufacture: Herzog
- Model: HTP40
-
The standard for pellet preparation- designed for requirements of laboratory operations
AREA OF APPLICATION
Use
Preparation of pellets in steel rings (40 or 51. 5 mm diameter), aluminium cups or free pressing for x-ray fluorescence spectroscopyMaterial
Different materials, raw meal, clinker, cement, slag, ores, oxidic material, ferroalloys (feed size 100µm)Operation mode
Semi-automaticADVANTAGES
Optimized for laboratory operations
The HERZOG pellet press HTP offers the full benefits of program-controlled sample preparation for x-ray fluorescence analysis. Pelletizing with the HERZOG HTP significantly increases reproducibility and accuracy of sample preparation. The HTP pellet press is a high-quality, precision engineering product with compact dimensions. It is ideally suited for laboratory requirements.Optimum quality of pressed pellets
The HERZOG hydraulic HTP press produces high-quality pressed pellets with a mirrorlike surface necessary for optimal XRF results. The HSM achieves the desired homogeneity and stability of each individual pellet with a maximum of reproducibility. The HTP 40 reaches press forces of 400 kN, the HTP 60 of up to 600 kN even with larger sample diameters.Easy handlingA swing-out cross-head makes filling and cleaning of the die quick, simple and safe. A number of pressing variables can be selected, depending on the press tool employed. Precision press tools with a range of diameters and materials permit free pressing, pressing in aluminum shells, and pressing in steel rings.
Precise control of the pelletizing process
The pelletizing process of the HTP is controlled by the PLC program. This leads to substantial improvement in reproducibility of sample preparation and consequently more precise analysis results. Pelletizing parameters such as total pressing force, incremental increase and decrease of pressure as well as pressure holding time can be preset on the HMI panel. The pressure increase and decrease during pelletizing are controlled to reduce inner stresses within the sample. This allows the production of perfect pellets even with complicated sample material. - Manufacture: Lorentzen & Wettre
- Type: TSO Tester
- Code: SE 150
- Type: 971396
- No. 368
- Manufacture: RAPID Labortex
- Model: R-3
- 220v
- 6Kw
- 3PH
- Year 1999
- Manufacture: IEC
- Model: K
- Hp: 3/4
- Hz: 60
- Volts: 115
- Amps: 7
-
An automatic timer
-
Dynamic electric braking
-
Swivel casters to permit easy mobility
-
Precise run times from 2 to 120 minutes in 2-minute increments
-
A manual mode for unlimited runs, via use of the timer
-
Gentle deceleration which cuts coasting time in half and help prevent resuspension
-
Steel cabinet has removable access plates and four locking swivel casters
-
Operating speeds range from 1,200 to 5,500 rpm
-
380xG to 4,420xG respectively, depending on the heads and shields used.
- Manufacture: IEC
- Model: HN-SII
- Manufacture: North Central Machine Works Ltd.
- Size: 12″
Herzog HTP40 Semi-Automatic Pellet Press
Herzog HTP40 Semi-Automatic Pellet Press
Product ID: PM13177
Product id: PM13177
Description: Manufacture: Herzog Model: HTP40 The standard for pellet preparation- designed..Lorentzen & Wettre TSO tester
Lorentzen & Wettre TSO tester
Product ID: PM12564
Product id: PM12564
Description: Manufacture: Lorentzen & Wettre Type: TSO Tester Code: SE 150..Laboratory Testing Roller 9-3/4″ x 5-7/8″
Product id: PT12823
Description: Contact us for more information!Rapid Labortex R-3 Dryer
Rapid Labortex R-3 Dryer
Product ID: PT12785
Product id: PT12785
Description: Manufacture: RAPID Labortex Model: R-3 220v 6Kw 3PH Year 1999International Equipment Company – IEC – model K Centrifuge, 3/4 hp
International Equipment Company – IEC – model K Centrifuge, 3/4 hp
Product ID: PT8825
The IEC model K floor model centrifuge is a heavy duty, large capacity machine designed for high speed with constant or intermittent use. The IEC model K is a G-testing machine designed for use by the electronic Industry. Designed for production sampling and research.
Features:
Product id: PT8825
Description: Manufacture: IEC Model: K Hp: 3/4 Hz: 60 Volts: 115..IEC / International Equipment Company model HN-SII Centrifuge
IEC / International Equipment Company model HN-SII Centrifuge
Product ID: P9424
Product id: P9424
Description: Manufacture: IEC Model: HN-SIIPulmac MS-B3-115V Shiv Analyzer
Product id: PC13755
Description: Manufacture: Pulmac Model: MS-B3-115VNorth Central Machine Works LTD. 12″ Sample Press Roller
North Central Machine Works LTD. 12″ Sample Press Roller
Product ID: PC13756
Product id: PC13756
Description: Manufacture: North Central Machine Works Ltd. Size: 12"